6in1 Stud Finder Wall Scanner Detector Multifunction Wall Scanner for AC Cable Wires Wood Metal Pipe Electronic Measuring Tools

Features

1.6 IN 1 Multifuction Stud Finder Wall Scanner：The electronic measuring instrument is suitable for detecting metals (ferrous and non-ferrous metals), wood studs, and live AC wires in walls, ceilings and floors. Can accurately and quickly locate the position of nails, screws, steel rods, wooden beams, AC cables, etc.
2.2 modes to Find Hidden Wood Studs(Deep mode/Exact mode): Can be used for drywall, plywood sheathing, bare wood floors and coated wood walls to find the right place to drill holes.
3.Dual calibration mode: Auto/Manual calibration, it will be automatically calibrated when it is lifted; Press the measurement key to calibrate manually.
4.Precision Positioning, with Indicator light and beep buzzer alarm: The indicator light indicates measurement, and three types of status lights are displayed(Ready detect mode-right indicator light, Approaching target-center indicator light, Precision Detect Target Zone-Beep alarm and left indicator light).
5.Easy to read: the large LCD display is easy to read. The signal strength display area on the display can clearly show the distance to the metal object. The screen can see the scan mode, detection depth, detection signal strength, battery indicator and center point, etc
6.Ergonomically designed：The Multifunctional Handheld Metal Detector is very comfortable to hold at any angle; the rubber on the back prevents damage to the wall, which is safe and comfortable
7.Wide Application：This stud wood finder can quickly locate metal and wood AC cables hidden in the walls, floors and ceilings of your home, and help you avoid dangers when installing TVs, cabinets, garage shelves, etc

Basic Parameters:

Maximum scanning depth:
Ferrous metals：≤120mm/4.72in
Non-ferrous metals (Copper)：≤100mm/3.94in
Live AC Wires(220V 50Hz/110V 60Hz)：≤50mm/1.97in（Attention: If the measurement is not accurate using AC wire mode, it may be due to the wires being too thin or the wires inside the wall being covered with PVC pipes, which shields the electromagnetic field. This is not a product issue, and you can switch the device to metal mode to measure the wires and obtain accurate values.）
Wood studs：Exact mode：≤20mm/0.79in; Deep mode：≤38mm/1.50in
Magnetic/Non-magnetic indication: Yes
Sound on/off: Yes
Battery level indicator: Yes
Inch/cm unit conversion: Yes
Operating Temperature: -10~50°C/14~122°F
Storage Temperature: -20-70°C/-4~158°F
Operating relative humidity: 35~55%RH
Automatic shutdown：After Approx.5 minutes of no operation.
Power Source：1*9V Battery (Not included)

Correct usage method:
Place the product on the detection surface, switch to the wooden gear function, wait for the green light to turn on (calibrate to zero), then let the product tightly adhere to the detection surface, slowly move the machine left and right (at a constant speed) for detection Note: During the detection process, the machine cannot detach from the detection surface and can only be moved back and forth left and right (the machine cannot be moved up and down). The movement process should be as slow and uniform as possible, while ensuring that the machine is tightly attached to the detection surface.

Packing list

1 * DSF01 Stud Finder
1 * Manual
1 * Cloth bag

Note

Please allow 1-3mm errors due to manual measurement